DSG-820CAHD
DSG-820CAHD
Fully automatic in 3 axis (x,y,z)
CAHD CONTROL PANEL
| DESCRIPTION | UNIT | DSG-820CAHD | ||
|---|---|---|---|---|
| General Capacity | Table size (lxw) | mm | 200x510 | |
| Max.grinding length | mm | 550 | ||
| Max.grinding width | mm | 220 | ||
| Distance from table surface to spindle center | mm | 380 | ||
| Standard mag. Chuck size | mm | 200x500 | ||
| Longitudinal Movement | Manual travel | mm | 600 | |
| Hydraulic traverse | mm | 510 | ||
| Hydraulic feed (table speed) approx. | m/min | 1~25 | ||
| Cross Movement | Manual travel | mm | 230 | |
| Auto cross feed | mm | 230 | ||
| Hand feed per revolution | mm | 5 | ||
| Hand feed per graduation | mm | 0.02 | ||
| Continuous cross feed (approx.)50/60HZ | mm/min | 510/650 | ||
| Increment cross feed | mm/min | 0.5~10 | ||
| Vertical Downfeed | Rapid traverse (approx.) | mm/min | - | 230 |
| Slow traverse (approx.) | mm/min | - | 29 | |
| Hand feed per revolution | mm | 1mm | ||
| Hand feed per graduation | mm | 0.005mm | ||
| Auto downfeed rate | mm | 0.001~0.099 | ||
| Jog | mm | 0.001 | ||
| Pre-set spark out times | 0.9(passes) | |||
| Grinding Wheel | Wheel size (diax width xbore) | mm | Ø180x13x31.75 | |
| Spindle speed (50/60HZ) | r.p.m | 3000/3600 | ||
| Motor | Spindle drive motor | HP | 3 | |
| Hydraulic motor | HP | 1 | ||
| Cross feed motor | W | 40 | ||
| Elevating motor | W | 40 | ||
| Weight | Net weight / gross weight (approx.) | kg | 1470/1620 | |
| Packing Size | Length × width × height | mm | 1780x1600x2200 | |
