DSG-818CAHD
DSG-818CAHD
Fully automatic in 3 axis (x,y,z)
CAHD CONTROL PANEL
| DESCRIPTION | UNIT | DSG-818CAHD | |
|---|---|---|---|
| General Capacity | Table size (lxw) | mm | 200x460 |
| Max.grinding length | mm | 475 | |
| Max.grinding width | mm | 210 | |
| Distance from table surface to spindle center | mm | 400 | |
| Standard mag. Chuck size | mm | 200x450 | |
| Longitudinal Movement | Manual travel | mm | 485 |
| Hydraulic traverse | mm | 485 | |
| Hydraulic feed (table speed) approx. | m/min | 1~25 | |
| Cross Movement | Manual travel | mm | 210 |
| Auto cross feed | mm | 210 | |
| Hand feed per revolution | mm | 5 | |
| Hand feed per graduation | mm | 0.02 | |
| Continuous cross feed (approx.)50/60HZ | mm/min | 510/650 | |
| Increment cross feed | mm/min | 0.5~10 | |
| Vertical Downfeed | Rapid traverse (approx.) | mm/min | 230 |
| Slow traverse (approx.) | mm/min | 29 | |
| Hand feed per revolution | mm | 1mm | |
| Hand feed per graduation | mm | 0.005mm | |
| Auto downfeed rate | mm | 0.001~0.099 | |
| Jog | mm | 0.001 | |
| Pre-set spark out times | 0.9(passes) | ||
| Grinding Wheel | Wheel size (diax width xbore) | mm | Ø180x13x31.75 |
| Spindle speed (50/60HZ) | r.p.m | 3000/3600 | |
| Motor | Spindle drive motor | HP | 2 |
| Hydraulic motor | HP | 1 | |
| Cross feed motor | W | 25 | |
| Elevating motor | W | 40 | |
| Weight | Net weight / gross weight (approx.) | kg | 1200/1380 |
| Packing Size | Length × width × height | mm | 1700x1600x2200 |
